Our worm gear reducers offer an option of a solid or hollow result shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, however, can withstand shock loading better than other lowering gearbox designs, making them well suited for demanding applications.
Tough compression-molded glass-fill up polyester housing
軽量でコンパクト
非腐食性
非金属
比率の範囲
SW-1、3.5:1から60:1
SW-5、5:1から100:1
グリース潤滑
Sound or Hollow output shaft
調整可能な取り付け位置
ウォーム ギア加速減速機は、1 件の評価で 5.0 点満点中 5 点を獲得しています。
5:1から60:1までの8つの比率が利用可能
1.33インチから3.25インチまでの7種類のギアボックスサイズ
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
シャフトスリーブはすべてのシャフトを保護します
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s velocity reducer products – has recently been serving industry reliably for over 40 years. Its proven modular style has set the industry standard for efficiency and is the most imitated item in the current worm gear rate reducer market. But why settle for a knock-off when you’re able to have the initial – from EP Gear.
仕様
11種類の基本的な単一縮小サイズ
8つの基本的なデュアル縮小サイズ
1/6 – 25 HP
5:1～100:1の比率の単一還元
100:1～3600:1の比率で二重減速
フランジなし、NEMA C面クイル、および結合入力スタイル
突出シャフトと中空シャフト
突出径1/2インチから2-1/4インチ
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
製品の特徴
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for much longer operating life.
Its multi-position mounting versatility permits installation in practically any position.
ハウジングは、水平ベースと垂直ベースを正確に位置合わせするために、上部と下部のレベルでストラドルミル加工されています。
内部バッフルにより、漏れのない確実な通気が保証されます。
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, in addition to greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of great torque and overhung loads.
Pipe plugs allow convenient fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
2D および 3D CAD 図面はどちらも当社の eCatalog で入手できます。
ギアボックス減速機
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) will be an ideal match for motors with excessive insight speeds, or when gearmotor performance is important. Get in touch with our technical sales staff for help identifying which gearbox answer is most beneficial for you.
直角減速機
ウォームギア減速機
EP’s worm equipment reducers were created with a hollow bore and allow for a corner convert with optional dual result. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes were created with five mounting choices providing flexibility when incorporating the reducer into item.
直角ベベルギアボックス
ベベル直角ギアボックス
The right angle bevel gearbox combines the features of our correct angle worm and planetary inline reducers. With a solid and efficient correct angle configuration, our right angle planetary gearboxes provide a robust solution. The right angle bevel gearbox will come in 18 ratios which range from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
インライン減速機
Iシリーズ遊星ギアボックス
iシリーズ遊星ギアボックス
Our I-Series little planetary gearbox configurations supply the smallest footprint and quietest operation of our swiftness reducers. These gearboxes 
are designed to manage varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we’ve a solution to fit your needs. Our 52 frame size is also available with plastic material gears for noise-delicate applications.
インラインプラネタリーギアボックス
インライン遊星ギアボックス
Our inline planetary gearbox configurations supply the highest efficiency and best output torque of most our velocity reducers. These gearboxes are made to manage varying loads with little backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we have a solution to suit your needs.
平行軸ギアボックス
平行軸ギアボックス
Parallel shaft gearboxes will be the top decision for continuous duty applications. Their equipment cluster design provides a highly effective approach for dissipating heat. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options therefore they work very well in environments with limited space. Our parallel shaft equipment reducers offer an affordable drop-in replacement solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes include a gear arrangement in which a equipment in the type of a screw, also known as a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms happen to be steel or stainless steel.
While worm gears act like a spur gear, the worm gearboxes are considerably smaller than other gear reduction boxes. A primary benefit of worm equipment reducers is that they create an output that is 90° from the input and can be utilized to transmit bigger torque or reduce rotational speed. Frequently, a worm gearbox offers right palm threads; to improve the path of the output, a left-hand thread worm gearbox is required.
ワールドワイド HdRS133-10/1-R 鋳鉄製直角ウォーム減速機 10:1 減速比
Did you discover our ウォーム減速ギアボックス info helpful, please let us understand
