Our worm gear reducers offer an option of a solid or hollow result shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, however, can withstand shock loading better than other lowering gearbox designs, making them well suited for demanding applications.
Tough compression-molded glass-fill up polyester housing
가볍고 컴팩트함
부식성이 없음
비금속
비율 범위
SW-1, 3.5:1 ~ 60:1
SW-5, 5:1 ~ 100:1
그리스 윤활
Sound or Hollow output shaft
조정 가능한 장착 위치
웜기어 가속 감속기는 1명의 평가자 중 5점 만점에 5.0점을 받았습니다.
5:1에서 60:1까지 8가지 비율 사용 가능
1.33인치부터 3.25인치까지 7가지 기어박스 크기
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
샤프트 슬리브는 모든 샤프트를 보호합니다
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s velocity reducer products – has recently been serving industry reliably for over 40 years. Its proven modular style has set the industry standard for efficiency and is the most imitated item in the current worm gear rate reducer market. But why settle for a knock-off when you’re able to have the initial – from EP Gear.
명세서
11가지 기본 단일 감소 크기
8가지 기본 이중 축소 크기
1/6 – 25마력
5:1 – 100:1 비율 단일 감소
100:1 – 3600:1 비율 이중 감소
비플랜지형, NEMA C면 퀼 및 결합형 입력 스타일
돌출 및 중공 결과 샤프트
1/2″에서 2-1/4″까지의 돌출 직경
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
제품 특징
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for much longer operating life.
Its multi-position mounting versatility permits installation in practically any position.
하우징은 수평 및 수직 바닥의 정밀한 정렬을 위해 상단과 하단 레벨에 걸쳐 밀링 처리되었습니다.
내부 방벽은 확실하고 누출 없는 통풍을 보장합니다.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, in addition to greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of great torque and overhung loads.
Pipe plugs allow convenient fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
2D 및 3D CAD 도면은 모두 당사의 eCatalog에서 확인하실 수 있습니다.
기어박스 감속기
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) will be an ideal match for motors with excessive insight speeds, or when gearmotor performance is important. Get in touch with our technical sales staff for help identifying which gearbox answer is most beneficial for you.
직각 감속기
웜기어 감속기
EP’s worm equipment reducers were created with a hollow bore and allow for a corner convert with optional dual result. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes were created with five mounting choices providing flexibility when incorporating the reducer into item.
직각 베벨 기어박스
베벨 직각 기어박스
The right angle bevel gearbox combines the features of our correct angle worm and planetary inline reducers. With a solid and efficient correct angle configuration, our right angle planetary gearboxes provide a robust solution. The right angle bevel gearbox will come in 18 ratios which range from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
인라인 리듀서
I-시리즈 행성 기어박스
i-시리즈-유성 기어박스
Our I-Series little planetary gearbox configurations supply the smallest footprint and quietest operation of our swiftness reducers. These gearboxes 
are designed to manage varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we’ve a solution to fit your needs. Our 52 frame size is also available with plastic material gears for noise-delicate applications.
인라인 행성 기어박스
인라인 유성 기어박스
Our inline planetary gearbox configurations supply the highest efficiency and best output torque of most our velocity reducers. These gearboxes are made to manage varying loads with little backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we have a solution to suit your needs.
평행축 기어박스
평행축 기어박스
Parallel shaft gearboxes will be the top decision for continuous duty applications. Their equipment cluster design provides a highly effective approach for dissipating heat. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options therefore they work very well in environments with limited space. Our parallel shaft equipment reducers offer an affordable drop-in replacement solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes include a gear arrangement in which a equipment in the type of a screw, also known as a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms happen to be steel or stainless steel.
While worm gears act like a spur gear, the worm gearboxes are considerably smaller than other gear reduction boxes. A primary benefit of worm equipment reducers is that they create an output that is 90° from the input and can be utilized to transmit bigger torque or reduce rotational speed. Frequently, a worm gearbox offers right palm threads; to improve the path of the output, a left-hand thread worm gearbox is required.
전 세계 HdRS133-10/1-R 주철 직각 웜 장비 감속기 10:1 비율
Did you discover our 웜 감속 기어박스 info helpful, please let us understand
