개요
빠른 세부 정보
- 원산지:
-
중국 저장성
- 브랜드 이름:
-
에프티
- 모델 번호:
-
VOL- IEC112S2250-6P
- 용법:
-
Boat, Car, Electric Bicycle, Fan, Home Appliance, Shell Eco-marathon Competition Car
- 인증:
-
CCC, CE, ROHS, UL
- 유형:
-
brushless DC motor
- 토크:
-
21.48Nm
- 건설:
-
영구 자석
- 정류:
-
Brushless
- 보호 기능:
-
Waterproof
- 속도(RPM):
-
1000rpm
- 연속 전류(A):
-
6.42A
- 능률:
-
IE 4
- 주택:
-
Aluminum Frame
- Speed Range:
-
1000rpm
- 재료:
-
Permanent Magnets
- Controller:
-
Customized, Optional
- Braker:
-
선택 과목
- Insulation Class:
-
Class F
- Enclosure:
-
IP54
- Poles:
-
6P
- Wire:
-
100% copper
- Duty:
-
S1 (continuous)
공급 능력
- 공급 능력:
- 10000 Unit/Units per Month
포장 및 배송
- 포장 세부 정보
- low noise 6 Poles 3HP 1000rpm IEC Brushless dc motor Packing: Standard sea or air package will be perfectly protected in the delivery.
- 포트
- FOB Ningbo
온라인 맞춤 설정
제품 디스플레이
| Motor type | Output Power | Voltage | Load | 속도 | 정격 토크 | 능률 | Noise | IP Class |
| KW | 다섯 | 에이 | RPM | nm | % | dB | ||
| VOL- IEC90S2250-2P | 2.25 | 220 ac | 6.42 | 3000 | 7.16 | 92 | 62 | IP 54 |
| VOL- IEC100S2250-4P | 2.25 | 220 ac | 6.42 | 1500 | 14.33 | 92 | 62 | IP 54 |
| VOL- IEC112S2250-6P | 2.25 | 220 ac | 6.42 | 1000 | 21.48 | 92 | 62 | IP 54 |
| VOL- IEC112S3750-2P | 3.75 | 220 ac | 10.70 | 3000 | 11.94 | 92.5 | 62 | IP 54 |
| VOL- IEC112S3750-4P | 3.75 | 220 ac | 10.70 | 1500 | 23.88 | 92.5 | 62 | IP 54 |
VIEW MORE PLS CONTACT US >>>
기타 제품
프로세스 흐름
회사 소개
Packing&Transport
큐:Motor has been running then fails to start,what to do?
에이:Likely cause: Fuse or circuit breaker is tripped.
What to do: Replace the fuse or reset the breaker.
Likely cause: Armature is shorted. Motor may make a humming noise and the circuit breaker or fuse will trip.
What to do: Disassemble motor and inspect the armature for a burnt coil. Inspect the commutator for burnt bars. If this condition exists, the motor needs to be replaced.
Likely cause: The brushes may be worn down too far and no longer make contact with the commutator.
What to do: Check the brushes to make sure that they are still making contact with the commutator. Contact manufacturer for brushes.
Likely cause: Controller may be defective.
What to do: Verify voltage is coming out of the controller.
큐:On initial installation, motor fails to start up,what to do?
에이:Likely cause: Motor is incorrectly wired
What to do: Verify that the motor is wired correctly.
Likely cause: No output power from controller.
What to do: Measure voltage coming from the controller.
Likely cause: Motor is damaged and the armature is rubbing against the magnets.
What to do: Disassemble motor and see if the armature can be realigned by reassembly. Motor may have to be replaced.
큐: Motor takes too long to accelerate,what to do?
에이: Likely cause: Motor controller not properly set.
What to do: Adjust the acceleration trim pot of the controller.
Likely cause: Brushes are worn.
What to do: Verify brush length.
Likely cause: Bearings may be defective.
What to do: Inspect bearings. Noisy or rough bearings should be replaced.
큐: Motor runs in the wrong direction,what to do?
에이: Likely cause: Incorrect wiring
What to do: Interchange the two motor leads.
큐: Motor runs OK but has a clicking noise,what to do?
에이: Likely cause: Suspect a burr on the commutator.
What to do: Remove burr from commutator using a commutator stone.
