概要
クイック詳細
- 原産地:
-
浙江省、中国
- ブランド名:
-
EPT
- ギアリング配置:
-
ワーム
- 出力トルク:
-
19-2745N.m
- 入力速度:
-
1500r/min
- 出力速度:
-
14-186rpm
- 適用業界:
-
Machinery Repair Shops
- ベアリング：
-
C&U
- ハウジングの材質:
-
鋳鉄
- 取り付け位置:
-
脚取り付け、フランジ取り付け
- オイルシール:
-
NAK
- サイズ：
-
40-250
- 比率:
-
10,15,20,25,30,40,50,60
- シャフト材質:
-
クロム鋼
- 出力形式:
-
ソリッドシャフト、ホローシャフト
- 色：
-
Green,yellow or according to arequirment.
供給能力
- 供給能力:
- 400 Piece/Pieces per Day electric motors speed reducer
梱包と配送
- パッケージの詳細
- cartons&wooden cases or according to customer's requirement
- ポート
- 寧波とか上海とか
-
リードタイム
: -
数量(個) 1 – 10 >10 推定所要時間（日数） 15 交渉中
オンラインカスタマイズ
FEATURS:
1.widely used in turbines, shaft liners and axletrees;good resistance to wear, with high precision in dimensions,low noise, advanced centric runningcastings.
2.With air vent and highprecision.
3.The structure is compact and the weight is large.
4.Packing:wooden cases or can be according to customer’s requriements.
NOTICE:
1. notice of installation
1.1 The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
1.2 The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
1.3 The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
1.4 Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
1.5 While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
1.6 When ordering or using all kinds of WPD type, if the motor weight is binger than the common,supporting set is required.
2.notice of usage
2.1 Before using,please check carefully whether the reducer modle, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.
| ベアリング | C&U |
| Material of Housing | 鋳鉄 |
| 取り付け位置 | 脚取り付け、フランジ取り付け |
| オイルシール | NAK |
| サイズ | 40-250 |
| Rtio | 10,15,20,25,30,40,50,60 |
| Material of Shaft | クロム鋼 |
| Output Form | ソリッドシャフト、ホローシャフト |
| 色 | Green,yellow or according to arequirment. |
