概要
クイック詳細
- 電源タイプ:
-
ディーゼル
- 寸法(長さ*幅*高さ):
-
1730mmx1000mmx800mm
- 状態：
-
新しい
- 保証：
-
1年
- アフターサービス提供:
-
Free spare parts, Field maintenance and repair service, Video technical support, Online support
- 原産地:
-
浙江省、中国
- ブランド名:
-
EPT
- 重さ：
-
80kg
- 認証：
-
ISO9001
- タイプ：
-
農場耕作者
- 使用：
-
農場
- モデル：
-
170F single cylinder four stroke gasoline engine
- Tillage:
-
50-70CM
- The cultivated land is deep: 15-30CM:
-
15-30CM
- ギヤ：
-
reverse gear, gap, forward gear
- Output power:
-
7 HPP / 3600rpm
- Output:
-
208CC
- Tank capacity:
-
3.6L
- Oil capacity:
-
0.6L
- Gross net weight:
-
80KG
- package size:
-
112* 51*51cm
供給能力
- 供給能力:
- 100 Set/Sets per Month 7HP Diesel Power Rotary Tiller Cultivator for Ploughing/Tillage
梱包と配送
- パッケージの詳細
- Export plywood case package 7HP Diesel Power Rotary Tiller Cultivator for Ploughing/Tillage Agriculture Usage
- ポート
- China main sea port ( Eg: Qingdao, Shanghai, Guangzhou, Ningbo, Tianjin and so on)
-
リードタイム
: -
数量(セット) 1 – 1 2 – 5 6 – 10 >10 推定所要時間（日数） 7 15 25 交渉中
オンラインカスタマイズ
7HP Diesel Power Rotary Tiller Cultivator for Ploughing/Tillage Agriculture Usage
製品説明
Introduction of7HP Diesel Power Rotary Tiller Cultivator for Ploughing/Tillage Agriculture Usage
The rotary tiller uses the engine output power to drive the rotary tilling blade, cutting and turning the soil, and throwing the cut soil back into the mud block to further break the soil block. The flat earth supports the surface of the earth. Finish the ploughing and raking at one time.
1 / depth adjustment generally speaking, rotary tiller tillage depth should not be less than 10 cm. The rotary tiller with walking tractor adjusts the depth of cultivated land by changing the height of the tail wheel. When adjusting, turn the adjusting handle. With wheeled tractor matching rotary tiller, ploughing depth by hydraulic system control. Before adjusting the depth of ploughing, adjust the length of the pulling rod on the tractor until the rotary tiller and the drive shaft are basically in the same plane. Then adjust the position limiter on the piston rod of hydraulic cylinder to limit the depth of the rotary tiller. In order to ensure that the depth of rotary tillage on both sides of the two sides is consistent, the distance between the two sides of the blade tip from the ground should be checked. If the distance from the ground is not consistent, the tractor should be adjusted on both sides of the pull rod. Until the distance between the two sides of the rotary knife from the ground is the same. In order to make the drive shaft and the universal joint rotate smoothly, the distance between the two sides of the rotary tiller and the rear wheel is measured with a ruler to determine whether the angle between the drive shaft and the forward direction is the same or not. If the angle is not consistent, adjust the tractor pull rod to make the rotary tiller in the most favorable working condition. Fourth, elevating height and adjusting the upward inclination of the universal joint over 30 degrees will increase the power loss of the universal joint and easily damage the universal joint. For example, when turning the ground, cutting off the power of the rotary tiller and then raising it will affect the efficiency of work. Therefore, it is necessary to lift the rotary tiller in the transmission. However, the elevation must be limited. Generally elevate to the tip of the knife off the ground 15~20cm is good. V. Blade adjustment according to different farming requirements, blade installation methods are three. When the factory is generally installed into the most commonly used staggered mode, or spiral mode. On the same plane, the staggered way is equipped with a left and right curved knife each, and the blade with two outer ends of the knife shaft bends in all directions, so that the soil block is not thrown to both sides, and the land after plowing is flat, which is suitable for raking after ploughing. A blade at both ends of the shaft bends inward, and the middle blade bends outwards, known as outward. After outward tillage, the soil is thrown to both sides, forming a shallow ditch, suitable for strip-breaking operation. The blades bend to the middle of the blade axis, and the ridge is formed in the middle after tillage, which is suitable for cultivation before the furrow, and can also make the unit cross the furrow on the furrow to fill the furrow. Note that when the blade is rearranged, the blade edge should be in the same direction as the axis. Otherwise, rotary tiller in the work will occur jitter, when serious, damage machine parts.
Specifications of7HP Diesel Power Rotary Tiller Cultivator for Ploughing/Tillage Agriculture Usage
|
モデル |
170F single cylinder four stroke gasoline engine |
| Tillage | 50-70CM |
|
Output power |
7hp / 3600rpm |
|
Tank capacity |
3.6L |
|
Gross net weight |
80/70KG |
|
容量 |
208CC |
|
package size |
112*51*51CM |
Pictures of7HP Diesel Power Rotary Tiller Cultivator for Ploughing/Tillage Agriculture Usage
工場
当社のサービス
Servicebeforesale:
1,24hoursonline.Yourinquirywillbequickreplybyemail.
Alsocangothroughallquestionswithyoubyanyonlinechattingtools(Wechat,Whatsapp,Skype,Viber,QQ,TradeManager)
2,Professionallyandpatientlyintroduction,detailspicturesandworkingvideotoshowmachine
Serviceonsale:
1,Testeverymachineandinspectthemachineseriously.
2,Sendthemachinepicturewhichyouorder,thenpackingitwithstandardexportwoodenboxafteryouconfirmthemachineisok.
3,Delivery:Ifshipbysea.afterdeliverytoseaport.Willtellyoutheshippingtimeandarrivaltime.Finally,sendalloroginaldocumentstoyoubyExpressForFree.IfdeliveryitbyExpresstoyourdoor(DHL,TNT,Fedex,etc)orby airtoyourairport,Orlogistictothewarehousewhichyourequest.Wewilltellyouthetrackingnumberafterdeliver.
Serviceaftersale:
1,Freeinsuranceforgoods
2,24hoursonlinetosolveanyproblem.SupplyyouEnglishmanualbookandtechnical
support,maintainandinstallvideotohelpyousolvetheproblem,ordispatchworkertoyourfactory.
パッケージ
認定資格
Office
