Common Description
Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is created to operate materials dealing with gear. The lowering 
motion is achived from the solenoid valve together with the lowering pace controlled by an adjustable needle valve. The left and proper functions are equipped having a dual pilot operated check out valve and cross-over relief valves.
Remark: Please seek advice from our revenue engineer for your diverse pump displacement, motor energy or tank capacity.
Particular Notes
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned in advance of set up of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of impurities.N46 hydraulic oil is advised.
four. This power unit should be mounted horizontal.
five. Check the oil degree from the tank immediately after the primary start out in the energy unit.
6. Oil changing is required following the first a hundred operation hrs, afterwards when every 3000 hours.
ΜΟΝΑΔΑ ΕΝΕΡΓΕΙΑΣ ΕΚΧΙΟΝΙΣΤΗ
TAGs:
