Περιγραφή προϊόντος
Περιγραφή προϊόντος
Equipped with high-performance diesel engine
It adopts a large-displacement high-performance diesel engine with a total displacement of 4400cc and 98.6 horsepower. Low fuel consumption, low vibration, low noise, high reliability, strong power, can easily cope with continuous operation of various loads. The fully open engine hood is adopted, and the maintenance of the engine before and after operation is simple and convenient.
Super hydraulic lifting force
Strong hydraulic lifting force: 3300kgf, even heavy work machinery can easily handle it.
Multi-speed transmission (F12/R12)
The multi-speed transmission with 12 forward and 12 backward speeds is adopted, and the multi-speed transmission adjustment can be perfectly adapted to any operating conditions.
Independent PTO (Power Take Off)
The walking part is equipped with an independent PTO clutch, which can be switched in or out of PTO mode with a single touch. In addition, the PTO can continue to work even when the machine is stopped, so it can effectively prevent the grass from clogging the machine when the forage work is performed
Λεπτομερείς φωτογραφίες
Herringbone pattern tires (standard configuration)
Equipped with open herringbone pattern tires, it can be used in both water and dry fields, which enables the machine to exert its high adhesion and greatly improve the walking performance.
Equipped with a cab with excellent sound insulation, it can work in a comfortable environment and greatly reduce the operator’s fatigue. The cab is equipped with heating and cooling air conditioners, which can maximize the comfort of the operator when working, no matter in spring, summer, autumn or winter.
1. No clutch switching
The forward and reverse of the machine can be simply completed by operating the orange handle on the left side of the steering wheel. In addition, the machine has a clutchless operation function, so the operation in the corners of the field can also be easily handled.
2. Premium seats with shock absorption
The high-grade seat with shock absorption ensures long-term comfortable work, and the seat back, forward and backward movement and height of the seat can be adjusted freely, ensuring that the operator is in the most comfortable position at any time. condition to operate the machine.
3. Equipped with air conditioner
The T954 with a cab is equipped with a manual air conditioner. It is easy to switch between air conditioning and heating, and the temperature setting is also very simple. No matter spring, summer, autumn or winter, it can ensure comfortable work.
4. Large Dashboard
A large instrument panel is designed in front of the seat, and the operation status of the machine is clearly visible at a glance, which is convenient for the operator to confirm, thus ensuring safe operation.
Προφίλ Εταιρείας
HangZhou Zhonghe international trade Co., ltd. is an enterprise specializing in the import and export of new and used tractors and harvesters. The company is located in HangZhou City, ZheJiang Province. The company has been engaged in agricultural machinery sales for more than 20 years. In 2571, we sell all kinds of agricultural machinery more than 2000 sets,including many world famous brands and domestic brands. The sales increases by 30% every year. Our company is becoming bigger and stronger step by step.
The company not only has rich sales experience, but also experienced after-sales team. It completely realizes the remote solution of the technical fault of the product. Patient after-sales service is the company’s business purpose. After years of efforts, the company has many stable long-term partners. Because of the trust of our customers, the company is getting better and better.
We have a strong technical team, can be customized according to the customer’s requirement
Our procurement staff purchase various brands of different types of agricultural machinery throughout the country every year. The company’s perennial stock of vehicles is up to several thousands. After receiving the customer’s deposit, the company can arrange the delivery in the first time, to ensure that customers receive vehicles in the shortest time.
We support all kinds of payment methods, T/T, LC, credit card, etc
Συσκευασία & Αποστολή
1. Professional sales staff provide you with one-stop agricultural machinery and equipment service solutions.
2. Repair replacement and return guarantee are provided together with the tractor, so that you have no worries after purchase.
3. A complete after-sales service system provides services for global agents and relieves the worries of agents.
Συχνές ερωτήσεις
Q1. How do you ensure your quality?
We have 2 QC managers whom work on this field more than 15 years, they can test the tractors parts by parts, our working attitude is carefully, strictly and seriously ;
Q2. Whether you could make our brand on your products?
Yes. We can print your Logo on both the products and the packages if you can meet our MOQ.
Q3. Whether you could make your products by our color?
Yes, The color of products can be customized if you can meet our MOQ.
Q4.How to guarantee the quality of your products?
1.Strict detection during production.
2.Strict sampling inspection on products before shipment and intact product packaging ensured.
| Drive Type | 4x4 |
| Rated Power | 72.5KW |
| Τόπος Προέλευσης | HUBEI |
| Video outgoing-inspection | PROVIDED |
| Επωνυμία | ISEKI |
| Αριθμός μοντέλου | T954 |
| Εφαρμοστέες βιομηχανίες | Farms |
| Βάρος | 3015 KG |
| Year of Manufacture | 2019 |
| Working hours | 775 |
| Rated revolving speed ( rpm ) | 2200 |
| ΜΕΓΕΘΟΣ | 3830*1985*2600MM |
| Number of cylinder | 4 |
| Tire Specifications | 9.5-24/12.4-24:16.9-30/16.9-30 |
| Transmission Box | 12F+12R |
| Suspension Type | Post Positioned Three-point Suspension |
| Min. ground clearance | 460mm |
| PTO Level | 2 |
| PTO rpm | 540/750 |
###
| Drive Type | 4x4 |
| Rated Power | 72.5KW |
| Τόπος Προέλευσης | HUBEI |
| Video outgoing-inspection | PROVIDED |
| Επωνυμία | ISEKI |
| Αριθμός μοντέλου | T954 |
| Εφαρμοστέες βιομηχανίες | Farms |
| Βάρος | 3015 KG |
| Year of Manufacture | 2019 |
| Working hours | 775 |
| Rated revolving speed ( rpm ) | 2200 |
| ΜΕΓΕΘΟΣ | 3830*1985*2600MM |
| Number of cylinder | 4 |
| Tire Specifications | 9.5-24/12.4-24:16.9-30/16.9-30 |
| Transmission Box | 12F+12R |
| Suspension Type | Post Positioned Three-point Suspension |
| Min. ground clearance | 460mm |
| PTO Level | 2 |
| PTO rpm | 540/750 |
###
Guide to Drive Shafts and U-Joints
If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
Symptoms of Driveshaft Failure
Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
Drive shaft type
Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!
U-joint
If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
maintenance interval
Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.
