bộ giảm tốc bánh răng trục vít

bộ giảm tốc bánh răng trục vít
One reduction worm gearing offers high ratio reduction with few shifting parts in a close-coupled small drive. The proper angle arrangement of driving-to-driven machine takes a minimum of space. Input and result shafts can be prolonged in either or both directions in horizontal or vertical plans adaptable to any installation requirement. Efficient engine speeds are decreased to slow speed requirements of several industrial machines in a single reduction.
Tính năng sản phẩm
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive use of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and long service existence. The hardened floor and polished alloy metal worm develops a simple, work hardened surface on the bronze gear. For this reason worm gears put on in and improve with extented service while various other gears are wearing out. Ever-Power offers a broad collection of model configurations, sizes, ratios, and add-ons from our standard products.
Fabricated Designs
If the application involves severe shock loads or possible housing damage from external sources (as in steel mills or mobile gear applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide maximum rigidity and strength that allows the transmitting of higher horsepower amounts than are feasible with regular cast iron products. Extra heavy side plates connect the worm and gear shaft bearing supports, assuring proper meshing of the apparatus under all load circumstances. In smaller sized sizes, fabricated steel reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can provide custom rate and reversed engineered reducers for your application, be it a new project or a direct drop-in alternative to a competitor’s quickness reducer. Fabricated steel reducers allow Ever-Power to complement a competitor’s footprint, centerline, and shaft height allowing a primary drop-in substitute saving the customer time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our design also includes a hardened, ground and polished alloy steel worm. This combination develops a easy, work-hardened mating surface of the bronze gear which enhances with prolonged service.
Worm gearing is a course of gear reducers that utilizes correct angle, nonintersecting shafts. This form of reducer provides soft and quiet procedure and allows for the probability of large swiftness reductions. These gears can be found from share in a wide variety of ratios, from as low as 4:1 up to 3600:1. The small design and construction allows worm equipment reducers to be positioned in a comparatively small space. Thus, high reductions in a limited package size may be accomplished with this configuration. Our worm equipment features the continuous sliding tooth actions between worm and the teeth. This increases the tolerance for heavy loads and shock loads. Worm gear drives provide users high reducing capacity for relatively low cost when compared to some other types of gearing.
The utilization of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series bottom on years of experiences uses designed teeth surface with unsurpassed torque transfer efficiency with great overall performance, efficency and cost.Worm gear program transmits power through sliding contact, resulting in extremely low vibration , sound, small backlash and self-locking property
-Housing:One time we casting creats great rigidity for serious impacts. Outer cooling fins and internal lubrication oil diversion channel style to improve heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, after that for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm equipment reducer is one kind of reduction gear box which contains a worm pinion input, an output worm equipment, and features a right angle result orientation. This type of reduction gear container is normally used to have a rated motor quickness and create a low speed output with higher torque value based on the decrease ratio. They often times can resolve space-saving problems because the worm gear reducer is one of the sleekest decrease gearboxes available because of the little diameter of its result gear.
worm gear reducerWorm gear reducers are also a popular type of speed reducer because they provide the greatest speed decrease in the tiniest package. With a higher ratio of speed decrease and high torque output multiplier, it’s unsurprising that many power transmission systems utilize a worm equipment reducer. Some of the most common applications for worm gears can be found in tuning instruments, medical assessment equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm gear reducer, the SW-1 and the SW-5 and both can be found in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are manufactured with tough compression-molded glass-fill polyester housings for a long lasting, long lasting, light-weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Đặc trưng
Our worm equipment reducers offer a choice of a good or hollow output shaft and feature an adjustable mounting placement. Both the SW-1 and the SW-5, however, can endure shock loading better than other decrease gearbox designs, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Không ăn mòn
Không phải kim loại
Phạm vi tỷ lệ
SW-1, 3,5:1 đến 60:1
SW-5, 5:1 đến 100:1
Bôi trơn mỡ
Solid or Hollow output shaft
Vị trí lắp đặt có thể điều chỉnh
Worm Equipment Reducers also called worm gearbox or worm swiftness reducers. Worm equipment reducers are used for speed decrease and increasing the torque for electric motor drives. You can choose to install your NEMA electric motor to the reducer by using the NEMA C face flange or use a coupling. If you want a coupling for the output or input shaft find our coupling section for selecting a coupling. You can expect four assemblies left hand and right hand and double result shaft and shaft input and shaft result. Interchangeable with many worm gear manufactures. Find data sheet in item overview for diamensions. Unless you see your type, make sure you Contact Us.
Có sẵn 8 tỷ lệ từ 5:1 đến 60:1
7 Kích thước hộp số từ 1,33 đến 3,25″
Universally Interchangeable Style for OEM Replacement
Vòng bi kép được áp dụng cho cả hai đầu trục
Anti-Rust Primer Applied Inside and Outside Gearbox
Ống bọc trục bảo vệ tất cả các trục
S45C Carbon Metal Shafts
Mô hình lắp bích cho động cơ 56C và 145TC
Ever-Power DDVM series triple-reduction worm gear swiftness reducers can be found in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes on request). Output torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in lbs for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are ideal for water/waste-water apparatus drive applications such as for example thickeners and clarifiers, which require a vertical down shaft. Other offered configurations also make Ever-Power triple decrease reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or materials handling systems where huge torques/gradual speeds are needed.
These reducers are also obtainable with a helical principal reduction stage and so are termed the HDVM series
Tính năng sản phẩm
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow velocity, high torque applications
Có sẵn 8 tỷ lệ từ 5:1 đến 60:1
7 Kích thước hộp số từ 1,33 đến 3,25″
Universally Interchangeable Style for OEM Replacement
Vòng bi kép được áp dụng cho cả hai đầu trục
Sơn lót chống gỉ bên ngoài và bên trong hộp số
Ống bọc trục bảo vệ tất cả các trục
Trục thép cacbon S45C
Mô hình lắp bích cho động cơ 56C và 145TC
Sự miêu tả
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive models are 56C or 145TC flange install with either right, still left or dual output shafts or a hollow bore output. The indirect drive models are shaft input-shaft result boxes for make use of with sprocket or pulley drive systems. They offer an effective low cost solution to speed decrease and improved torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will have to determine the required torque and service factor for the application. Click on “Specs” above for a table that will assist in identifying the service aspect. For service elements above 1.0, multiply the mandatory torque by the program factor.
Our regular 700 Series – the heart of Ever-Power speed reducer product line – has been serving industry reliably for over 40 years. Its proven modular design has set the market standard for functionality and may be the most imitated product in today’s worm gear speed reducer market. But why settle for a knock-off when you can have the original – from Ever-Power.
Thông số kỹ thuật
11 basic solitary reduction sizes
8 kích thước giảm kép cơ bản
1/6 – 25 mã lực
Tỷ lệ 5:1 – 100:1 giảm đơn
Tỷ lệ 100:1 – 3600:1 giảm gấp đôi
Kiểu đầu vào ghép nối, đầu nối mặt C NEMA không có bích
Trục đầu ra nhô ra và rỗng
Đường kính nhô ra từ 1/2″ đến 2-1/4″
Đường kính lỗ rỗng đầu ra từ 5/8″ đến 3-7/16″ (với hơn 20 kích thước lỗ rỗng được chia sẻ)
Tính năng sản phẩm
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in practically any position.
Vỏ được phay theo phương thẳng đứng, mặt trên và mặt dưới bằng phẳng, để căn chỉnh chính xác các đế theo chiều ngang và chiều dọc.
Các vách ngăn bên trong đảm bảo thông gió tốt, không bị rò rỉ.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Trục ra bằng thép cường độ cao dòng 700 của chúng tôi đảm bảo sự tiện lợi khi chịu mô-men xoắn cao và tải trọng nhô ra.
Nút bịt ống cho phép dễ dàng đổ đầy, cân bằng và xả nước ở hầu hết mọi vị trí lắp đặt.
Đường kính phớt dầu siêu hoàn thiện của Dòng 700 trên cả trục đầu vào và đầu ra giúp kéo dài tuổi thọ của phớt.
Bạn có thể tìm thấy bản vẽ CAD 2D và 3D trong eCatalog của chúng tôi.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without external ribs, is made from close-grained cast iron and for rigid equipment and bearing support. In addition, it offers excellent heat dissipation.Double lip, spring-loaded seals protect from oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon steel shafts for greater power.High tensile strength cast bronze worm wheel and hardened and surface alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Essential oil sight gauge for ease of maintenance (unavailable upon sizes 25 and 34).Factory oil packed.Every device test run prior to shipment.Universal mounting with bolt-on feet.Highly modifiable design.All of this at substantially lower prices than you have been accustomed to paying for reducers of lesser quality. Less