Überblick
Kurzinfo
- Herkunftsort:
-
Zhejiang, China
- Markenname:
-
EPT
- Modellnummer:
-
K series
- Nennleistung:
-
0.18-200KW
- Getriebeanordnung:
-
Fase / Gehrung
- Ausgangsdrehmoment:
-
≤50000Nm
- Eingangsgeschwindigkeit:
-
600~1800rpm
- Ausgangsgeschwindigkeit:
-
0.091-265rpm
- Farbe:
-
As your request
- Material of Housing:
-
Gusseisen
- Material of Gear:
-
20CrMnTi
- Qualitätskontrollsystem:
-
ISO9001-2008
- Effizienz:
-
Single-Stage 96%
- Working Temperature:
-
-40℃-50℃
- Working Altitude:
-
≤1000m
- Circumferential Speed:
-
≤20m/s
- Rotation Direction:
-
Normal or Reverse
- Industry Limitation:
-
Without Industry Limitation
Lieferfähigkeit
- Lieferfähigkeit:
- 1000 Set/Sets per Month Wanxin Gearbox Manufacture
Verpackung & Lieferung
- Verpackungsdetails
- K series Gearbox in Plastic bag + PE foam + Wooden case + Metal strap
- Hafen
- Qingdao/Shanghai
-
Lieferzeit
: - 15-30days after order K series Gearbox
Online-Anpassung
Produktbeschreibung
K series speed reducer motor BEVEL Right angle gear unit with flange foot mounted
Future:
- WK series reducer are based on the building block desing, so it’s convenient for them to fit various of motors according to customer’s requirement.
- High transmission efficiency. A single machine can reach a transmission efficiency as much as 96%.
- Precise division of transmission ratio with a wide range. The combination of machines can produce a larger transmission ratio at a low output rotate speed.
- Various ways of installation. Horizontal installation at any position or B5, B14 flanged installation, the deceleration machine have two bottom feet processes to install the flat surface.
Working Environment:
- Working temperature: -40~50°c( the lubrication should be heated above 0°c if the machine works below 0°c)
- The altitude of working place should be lower than 1000 meters.
- The input rotate speed should not exceed 1800rpm. The circumferential speed of the gear should not exceed 20m/s.
- Suitable for normal-reverse rotation.
- Without industry limitation.
- Please consult our technical supporting department for other circumstances.
| Artikelname | WanxinK series speed reducer motor BEVEL Right angle gear unit with flange foot mounted |
| Model No. | K Series |
| Material | Housing/cast iron |
| Gear/20CrMoTi; Shaft/High-strength alloy steel | |
| Eingangsgeschwindigkeit | 600~1800rpm |
| Ausgangsgeschwindigkeit | 0.08~263rpm |
| Verhältnis | 5.36-200 |
| Input Power | 0,12 bis 200 kW |
| Service Factor | / |
| Pole | 1-4 pole |
|
Mamax Permissible Torque |
10~58500N.M |
|
Qualitätskontrolle System |
ISO9001-2008;CE;IQNet |
|
Verpackung |
Plastic bag + PE foam + Wooden case + Metal strap |
| Lieferung |
15-30 days after order |
Dimension & Mounting
Picture Show
Verpackung & Versand
Factory Show
Wanxin Speed Reducer has committed ourselves to the research,design,production of speed reducer (changer) mechanical transmission at all times, which is the appointed enterprise designated by the Ministry of Machinery Industry and passed the ISO9001 international quality system certification.
Zertifizierungen
|
IQNet Certificate For Wanxin Speed Reducer |
CE Declaration For Wanxin Speed Reducer |
ISO 9001:2008 For Wanxin Speed Reducer |
Häufig gestellte Fragen
Q:WhatinformationshouldItellyoutoconfirmspeedreducer?
A:Model/Size,TransmissionRatio,Shaftdirections&Orderquantity.
Q:WhatifIdon’tknowwhichgearreducerIneed?
A:Don’tworry,Sendasmuchinformationasyoucan,ourteamwillhelpyoufindtherightoneyouarelookingfor.
Q:WhatshouldIprovideifIwanttoorderNON-STANDERDspeedreducers?
A:Drafts,Dimensions,Picturesandsamplesifpossible.
Q:WhatistheMOQ?
A:ItisOKforoneorsmallpiecestrialorderforqualitytesting.
Q:WhoIshouldcontact?
A:PleasecontactEthanWangifyouneedmorehelp.
Skype:Ethan_Gearbox/Cellphone:+8613335201180
Q:HowlongshouldIwaitforthefeedbackafterIsendtheinquiry?
A:Within12hours
Q:Whatisthepaymentterm?
A:YoucanpayviaT/T(30%inadvance+70%beforedelivery),L/C,WestUnionetc
Q:Whatisthedeliverytime?
A:Normallyis20-30daysafterorder,forspecialmodelorbigquantitypleaseemailtousforchecking.
Q:Whatistheguaranteetime?
A:12months
