- Place of Origin:
- Brand Name:
- Model Number:
- Rated Power:
- Gearing Arrangement:
- Output Torque:
- Input Speed:
- Output Speed:
- Quality Control System:
CCC,CQM,Supplier Assessment, MA
- Mounting Position:
Horizontal (foot mounted) or Vertical (flange mounted)
According to customer's quest
Steel or cast iron
- Gear material:
low carbon high alloy steel
- Gear accuracy:
less than 6
- Output Design:
solid shaft, hollow shaft, flange
- Supply Ability:
- 100 Set/Sets per Day
Packaging & Delivery
- Packaging Details
- Big size: fumigated wood carton or non-wood packing material carton”>Small size: standard export packing (carton and pallet)
Big size: fumigated wood carton or non-wood packing material carton
- main port of China
- about 30 workdays
F Parallel Shaft agricultural gearbox for tractor:
1.High modularization design: may equip with various motor or other power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type.
2.Transmission ratio: fine division, wide scope. The combined machine type may form very large transmission ratio, i.e. output very low rotary speed.
3.Form of installation: the position to be installed is not limited.
4.High strength, compact: the box body is made of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
5.Long life: Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically, therefore the noise of speed reducer is low.
7.High efficiency: the efficiency of single machine is not less than 95%.
8.May bear larger radial load.
9.It may bear the axial load that is not more than 15% of radial force.
Model selection note:
1.Please make a note,if it needs connecting flange.
2.Contents of motors for input shaft types are not listed.
3.Degree=0°,if terminal box position is not mentioned.It is X, if cable entry position is not mentioned.
4.If specific rotation directions of output shaft or/and input shaft are specially requested,please contact our technology department,and make detailed description while placing order.
Our package boxes abide by exported package standard. We main use plywood boxes and wooden case boxes.
We have Niles contour gear grinding machine imported from Germany,OKUMA horizontal machining center imported from Japan,gear inspection and test center and three-coordinates measuring machine.
[Sample Exhibition Hall Corner]
[Canton Fair Booth]