DUMP TRAILER Power UNIT-DOUBLE ACTING
This power unit features a power up power down circuit with load holding on both A & B ports. A stress compensatred flow handle may be additional to circuit to regulate the decent pace with the cylinder.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned ahead of set up of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should really also be clean and absolutely free of impurities. N46 hydraulic oil is advised.
4. The power unit ought to be mounted horizontally.
5. Check the oil level within the tank following the first running of the energy unit.
6. Oil altering is required soon after the initial a hundred operation hrs, afterwards as soon as every 3000 hrs.
DUMP TRAILER Energy UNIT- SINGLE ACTING
This energy unit includes a energy up gravity down circuit. Commence the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve might be presented if required. Also a stress compen sated movement handle can be additional for the circuit to regulate the descent speed from the cylinder.
Remark: Please seek advice from our revenue engineer for that diverse pump displacement, motor electrical power or tank capability.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean the many hydraulic components concerned just before installation of the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which really should also be clean and free of impurities.N46 hydraulic oil is suggested.
4. The electrical power unit must be mounted horizontally.
five. Check the oil degree while in the tank right after the initial operating of your energy unit.
6. Oil modifying is needed soon after the preliminary a hundred operation hrs, afterwards once every single 3000 hrs.